Small/Medium SCD 2 mm neoprene diving hood Title
A 2mm diving hood for protecting your head during your sessions.
2 mm fully reversible neoprene hood.
Tab on the back of the hood enables hooking it up.
Neoprene hood 2mm thick.No seams at the ears and neck to avoid friction.,
Tips for maintaining your neoprene products?
1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with a bactericide solution.3) Rinse thoroughly in clean water.4) Dry on a wide hanger in a dark and well ventilated place.Caution the sun will cause the colours of the
ile parts of the wetsuit to fade and speeds up the ageing process of the neoprene.Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease,
Adjust the thickness, adjust your warmth!
When diving, cold is your worst enemy!Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty. ,
Main fabric,Rubber - Chloropren - Neopren: 60%,Elasthane: 06%,Polyester: 34%