‎DECATHLON‎

4/5

Unique size 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader, Default

‎٤٩.٠٠ د.إ.‏ AED 49.00 2022-12-07 http://schema.org/NewCondition In Stock
Azadea

تفاصيل

إجراءات المنتج

This inner tube allows you to continue cycling when a conventional inner tube would have gone flat.

26 self-repairing Schrader valve inner tube. The preventative liquid inside the inner tube instantly repairs punctures.

Compatibility
26 Schrader valve (large valve) bike tyres. ETRTO 44/57 - 559

Puncture resistance
The liquid in the inner tube seals small punctures (< 3mm).

Waterproof
Optimised composition to ensure your inner tube has a good seal.

How to choose your inner tube

Check the information indicated on the sidewall of the tyre (diameter and width). For example, 26 x 2% means your tyre is 26 inches in diameter and 2% inches in width.On the sidewall, you will also find the dimensions in mm in international ETRTO measurements.For example 50-559 means the tyre is 50 mm wide with an inner diameter of 559 mm (or 26 x 2%).

Removing an inner tube

Remove the old inner tube using B'Twin tyre levers.

What to check before installing your new inner tube

Check the condition of your tyre and replace it if necessary.Make sure no objects are lodged in the tyre.Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.Check that your rim does not have any other issues that could damage your inner tube.s4

Fitting your inner tube

Watch our video before you start.Pre-inflate the inner tube slightly to avoid pinching.Insert the valve, making sure you are using the correct valve for your rim.Put the inner tube entirely inside the tyre so that it fits inside the rim.Take care not to pinch the inner tube when fitting.s5

Mounting the tyre

Start by mounting the tyre onto the wheel on the opposite side to the valve.Finish mounting the tyre at the valve to avoid pinching the inner tube.Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.s6

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).Regularly check that your tyre is in the correct position as you inflate it.s7

Tip from the pros

To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.s8

Weight

320g

Composition

,Rubber - Isobutylene Isoprene Rubber - Butyl: 100%

رقم المنتج # ‎54_393301_000-0000

المزيد من المعلومات حول التوصيل & المرتجعات

4/5
15 اراء الزبائن
@@@@@@@
@@@@
01/07/2021
Bought to replace old tubes.
I replaced my old tyres and inner tubes on the same night with these and I can honestly say these are top quality and easy to fit.
30/06/2021
perfect
very easy to fit as i followed the advice given in store by the staff great
04/06/2021
Inner Tube
seems to be holding the pressure
20/05/2021
Puncture resistant tube
I tried to follow the very limited instructions on the box which involved a partial pressure of 0.5 bar before installing in the tyre. Having installed successful I tried to pump to the recommended 3.5 bar but I couldn't get a reading from the gauge. I pumped until it was firm but I did not like the uncertainty of not knowing the pressure. I tried several times with the pump gauge and also with a separate digital gauge with no success. I eventually decided to deflate and replace with a standard tube. Disappointing
07/04/2021